This node vertically stacks 2 materials, with the base being at the bottom of the stack, with the Top layer above it.
Material Top
Material to be used as the top layer. If no top layer is set, then the base material will be used by itself.
Material Base
Material to be used as the base layer
Top Mix
Defines the mix between the base and top layers. This value can either be set via the slider or B/W map, PxrPattern, or float value.
Top Thickness
This value defines the thickness of the top layer. This value can either be set via the slider or B/W map, PxrPattern, or float value.
It is only relevant for interior effects associated with the top material, such as absorption. If the top material is itself a layer node, this value is passed on to its base component. And if the top material is a mix or add, this value is passed on to both child materials.
Layer Mode
Switches the layering model.
- Fresnel Blend simply attenuates the base layer using the transmission of the top layer.
- Smooth Coating extends this model by also refracting the rays through the top layer.
- Rough Coating extends the Smooth Coating model by clamping the roughness of the base layer to the roughness of the top layer.
- Auto chooses the model depending on the materials that are being layered.
In Auto mode, Fresnel Blend will be used when the base layer is diffuse, while Rough Coating will be used when the base layer is specular.
Layering Modes
Fresnel Blend
Section | |||||||
---|---|---|---|---|---|---|---|
|
Rough gold base layer and dielectric top layer with varying IOR (1.0-3.0) |